Accessories
The complete range of accessories for raised floors.
Eterno Ivica makes The Gladstone in Australia perfect
For the new luxury residential complex in South Melbourne, Australia, Eterno Ivica supports were used, that have guaranteed an excellent result with the GRF system and the Pedestal Prime® range.
Perimeter spacer 20/15/10
The new PP perimeter spacer is a classy detail that allows you to elegantly and uniformly distance the slabs that make up the flooring from the perimeter walls, offering the maximum guarantee of stability. The new version allows, with the simple pressure of the hand, to remove the tabs at the ...
Cantilevered perimeter spacer
Cantilevered perimeter spacer The cantilevered spacer is a galvanised steel profile, 86.6 cm long, to be applied to the head of the supports close to the wall to solve the problem of small cantilevered slabs, which would otherwise be suspended without support. In section, the spacer has groov...
Universal clip for laying planks on aluminium joist
Universal clip for laying planks on aluminium joist This solution consists of a special nylon (polyamide) clip, shaped to fit perfectly over the aluminium joist made by Eterno Ivica. It allows the installation of wooden planks in order to create 4 or 8 mm joints.
Chave de ajuste para suporte ajustável para piso elevado
Chave de ajuste para suporte ajustável para piso elevado A chave de ajuste reforçada para suporte ajustável para piso elevado permite ajuste com precisão até mesmo de pisos previamente instalados. Muitos pontos fortes, para operação 30% mais rápida com mais segurança e sem complicações...
Screwdriver accessory
Screwdriver accessory New steel screwdriver accessory for “quick unscrewing and screwing”.
Topo vertical grampeado para piso flutuante
Topo vertical grampeado para piso flutuante Nós criamos o topo vertical grampeado para piso flutuante para resolver um problema comum em muitos tipos de piso externo: nomeadamente, fechar o topo na ausência de uma parede externa. O topo vertical grampeado é uma ferramente inovadora que pe...
Topo vertical grampeado para piso flutuante
Topo vertical grampeado para piso flutuante Nós criamos o topo vertical grampeado para piso flutuante para resolver um problema comum em muitos tipos de piso externo: nomeadamente, fechar o topo na ausência de uma parede externa. O topo vertical grampeado é uma ferramente inovadora que pe...
-477590973f9fbc11af5ce78f4db44b2f.jpg "Vertical angular lining clip")
Vertical angular lining clip
Vertical angular lining clip This particular CLIP, both of the Head and of the Base, is used in the case of a vertical “corner” infill, instead of using two Head clips and two Base clips, a single Head clip and a single Base clip are used. A solution consisting of two particular c...
Clipe universal para a espessura do piso elevado
Clip de borbo placa para gerado do revestimento A placa de borbo clip levantado do chão foi projetada pelo Eterno Ivica para evitar o contato entre as placas e pisos elevados ao ar livre, parede de perímetro na placa placa de clip, inteiramente construída em aço inoxidável, é equipado com...
Polypropylene perimeter spacer
New perimeter spacer The spacer is a classy detail that allows to space the flooring plates from the perimeter walls in an elegant and uniform way, offering the maximum guarantee of stability. The new spacer is produced entirely in 100% recyclable polypropylene for greater ve...
SCUDO - SEPARATING LAYER
Scudo - Separating layer Scudo is a 3 mm thick high density modified closed cell expanded insulating layer. Applied under the base of the support, it has the function of a separating layer, it protects the waterproof covering from flooring supports and it decreases the acoustic bridge tha...
SUPPLEMENTARY RUBBER BASE
Supplementary Rubber Base The supplementary rubber base in thermoplastic rubber (TPE) is applied under the base of the pedestals and its function is to protect the waterproofing membrane from the supports of the raised flooring. It also decreases the acoustic impact created between the fl...
SUPPLEMENTARY GALVANISED STEEL BASE
Supplementary galvanised steel base The supplementary galvanised steel base consists of a 1 mm thick galvanised sheet and it measures 184x184 mm in size, it is applied under the base of the metal pedestals SMA and SMAT in order to protect the waterproofing membrane from the supports of th...
SLAB LIFTER
Slab lifter It is an essential tool if you want to remove or move an already laid flooring slab. It has the possibility of slipping into the 2-3-4 mm joints, it is easy to hold and use. It is sufficient to insert the tool into the joint and rotate it 90°, at this stage the slab is rais...
Zinc-plated lifting handle for tiles 400 x 400 mm
Zinc-plated lifting handle for tiles 400 x 400 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints a...
Zinc-plated lifting handle for tiles 500 x 500 mm
Zinc-plated lifting handle for tiles 500 x 500 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simple one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints an...
Zinc-plated litfing handle for tiles 600 x 600 mm
Zinc-plated litfing handle for tiles 600 x 600 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints a...
ADJUSTABLE LIFTING HANDLE
Adjustable lifting handle The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints and allow to lift al...
SUCTION CUP SLAB LIFTER
Suction cup slab lifter The vacuum suction cup slab lifter is an innovative solution for handling ceramic slabs; thanks to the rubber plate, with a diameter of 200 mm, it guarantees excellent grip. Thanks to its side seal, it is perfectly adaptable and grips on any surface, s...
Compensador de declive TWIST TW 110
Compensador de declive TWIST O compensador de declive Twist foi elaborado para permitir a nivelação de declives de 0% a 1% de grau com um simples movimento. Modulável e fácil de ajustar através de um simples giro, ele possibilita superfícies perfeitamente planas. O compensador de declive Tw...
Compensador de Inclinação Twist TW 150
Compensador de Inclinação Twist O compensador de inclinação Twist TW 150, criado na espessura específica de 150 para o suporte Star.T, permite a inclinação de 0 até 1%: adequadamente combinado e ajustado, ele garante o nivelamento perfeito de qualquer pavimento. Compatível com Suportes EH com p...
Safety plate
Safety plate The safety plate by Eterno Ivica consists of a 2 mm thick galvanized steel sheet, suitably shaped in order to support the flooring elements in the event of accidental breakage, eliminating the risk of accidents as the safety plate will support both the flooring element and the pos...
Slab edge profile
Slab edge profile The Slab edge profile by Eterno Ivica is designed to limit the raised floor’s edges in correspondence with a vertifcal covering. The slab edge profile has a 20mm decorative part and a tooth overlapped to the vertical plate in order to hide the junction with the floor. It i...
LGH1 shims' thickness for supports
LGH1 shims' thickness for supports LGH1 shims' thickness for supports with anti-slip and anti-noise effect. Disks for creating thickness in one or more support's sections.
Calço LGH2 para suporte
Calço LGH2 para suporte Calço LGH2 para suporte com superfície antiderrapante e redução de ruído. Discos para calçar uma ou mais seções do suporte.
Calço LGH3 para suporte
Calço LGH3 para suporte Calço LGH3 para suporte com superfície antiderrapante e redução de ruído. Discos para calçar uma ou mais seções do suporte.
Calço de borracha LH3 para suporte
Calço de borracha LH3 para suporte Discos para calçamento de uma ou mais seções do suporte. O calço LH3 para suportes pode ser usado embaixo ou em cima de qualquer suporte e age como um calço para uma ou mais seções do suporte.
Clips for hexagonal plates
Clip for laying hexagonal plates With the simple and quick application of a small polypropylene clip on the heads of SE and NM supports, we can meet the creative needs of architects and customers who see in the hexagonal plates a possible and imaginative aesthetic solution for the realization ...
TOOL TO INCREASE THE THICKNESS OF THE FINS
Tool to increase the thickness of the fins This accessory allows to increase the thickness of the fins, it is simply pushed into the 4 mm thick fins and it is available for sizes from 5-6-7-8-9-10 mm. The 12 mm height of the fins remains unchanged.
Aluminium ECO joist
The aluminium ECO joist in a new version lighter and cheaper. Realized in two different colors: aluminium and black. The joist offered in two different solutions: The A side is defined by two boxed profiles, divided by a 4 mm gap defining a lane, required for attaching the metal clips suppl...
Aluminium ECO joist for rapid flow
The NEW Aluminium ECO joist for rapid flow in a new version: lighter and cheaper. Realized in two different colors: aluminium and black. Defined by a 'double joist' structure, consisting of two boxed profiles, divided by a 6.5 mm gap, the space required for fixing the metal clips supplied as ...
Viga de Alumínio
Viga de Alumínio Utilizada para assentar placas cerâmicas em uma subestrutura de vigas de alumínio com Suportes SE, NM, SB, ST e EH. *o preço do suporte ajustável para viga de alumínio Eterno e New Maxi é igual ao dos suportes com separadores de 2, 3 ou 4 mm de espessura.
Aluminium joist for rapid flow
Aluminium joist for rapid flow The aluminium joist for rapid flow is a “double joist” consisting of two profiles spaced by a 6.5 mm gap which serves as drainage for the rapid outflow of rainwater. It has been designed for the installation of porcelain stoneware slabs, multi-format sl...
Joist joint
Joist joint The Eterno Ivica joist joint is a non-structural product, therefore it only acts as a connection between various joists to avoid any displacement. Made of black polypropylene, it can be used both on cantilever beams and on rafters resting on the head. It presents t...
Quick flow joint joist
Quick flow joint joist Quick flow joint joist for the new aluminium joist.
PVC gasket for quick flow joist
PVC gasket for quick flow joist PVC gasket for the aluminium quick flow joist.
Borracha de isolamento acústico para vigas de alumínio
Borracha de isolamento acústico para vigas de alumínio Disponível em práticos rolos, a borracha adesiva de isolamento acústico pode ser aplicada ao longo de toda a viga de alumínio ou em pontos específicos, a fim de evitar o contato direto entre as placas e o metal.
Placas Separadoras para Vigas em Alumínio
Placas Separadoras para Vigas em Alumínio As Placas Separadoras com a função de espaçamento angular são projetadas para manter as pranchas no local correto e criar uma abertura. O fixador possui um formato que permite a colocação em qualquer local da viga restante em sua estrutura sem sair...
Tile levelling system
Leveller for tiles The leveller for tiles is an indispensable tool for the installation of porcelain stoneware floors and walls and it consists of three elements: a tie rod, a spacer and a protection ring. The cylindrical part called "tie rod" is inserted in the "spacer" by screwing an...
Vertical perimeter profile
Vertical perimeter profile The Vertical perimeter profile is an element of closure and finishing of the perimeter edges in the external raised flooring, it adapts perfectly to the flooring slabs of 20 mm thickness and to the supports that act as a substructure. It is a product that combines...
Joint 90° Angle
Joint 90° Angle The 90° Corner Joint is a related accessory of the vertical perimeter profile. Available in two colors, silver and anthracite gray, the joint is in aluminum and has standard heights of 30-60-90-120-150-180 mm. Necessary for the creation of internal or external corners o...
Linear joint
Linear joint The Linear Joint is a related accessory of the vertical perimeter profile. It is available in two colors, silver and anthracite gray, the joint is in aluminum and has standard heights of 30-60-90-120-150-180 mm, like the profile and the 90 ° joint. It is necessary for the re...
