Accessories
The complete range of accessories for raised floors.
On June 2nd 2023 we are closed
We inform you that the company will be closed on 2nd June.
Adjusting key
Adjusting key Adjusting key for adjustable supports for elevated floors, reinforced for millimeter adjustment even with the floor already laid. Many strengths, for a 30% faster installation, safe and without problems. With the new raw cut in the handle is possible to easily remove t...
Screwdriver accessory
Screwdriver accessory New steel screwdriver accessory for “quick unscrewing and screwing”.
Upper clip for vertical closure
Upper clip for vertical closure We designed the vertical clip edge for raised flooring to address a common problem for many types of external flooring: namely, plugging the edge in the absence of an outside wall. The vertical clip edge is an innovative tool that allows to easily and el...
Lower clip for vertical closure
Lower clip for vertical closure We designed the vertical clip edge for raised flooring to address a common problem for many types of external flooring: namely, closing the edge in the absence of an outside wall. The vertical clip edge is an innovative tool allowing you to easily and el...
-477590973f9fbc11af5ce78f4db44b2f.jpg "Vertical angular lining clip")
Vertical angular lining clip
Vertical angular lining clip This particular CLIP, both of the Head and of the Base, is used in the case of a vertical “corner” infill, instead of using two Head clips and two Base clips, a single Head clip and a single Base clip are used. A solution consisting of two particular c...
Perimeter spacer
Perimeter spacer The perimeter spacer for raised floor is designed by Eterno Ivica to avoid contact between plates and outdoor raised floors, perimeter wall. It is entirely built in stainless steel, is equipped with a shock absorber for the longitudinal and transverse expansion and a secu...
Polypropylene perimeter spacer
New perimeter spacer The spacer is a classy detail that allows to space the flooring plates from the perimeter walls in an elegant and uniform way, offering the maximum guarantee of stability. The new spacer is produced entirely in 100% recyclable polypropylene for greater ve...
SCUDO - SEPARATING LAYER
Scudo - Separating layer Scudo is a 3 mm thick high density modified closed cell expanded insulating layer. Applied under the base of the support, it has the function of a separating layer, it protects the waterproof covering from flooring supports and it decreases the acoustic bridge tha...
SUPPLEMENTARY RUBBER BASE
Supplementary Rubber Base The supplementary rubber base in thermoplastic rubber (TPE) is applied under the base of the pedestals and its function is to protect the waterproofing membrane from the supports of the raised flooring. It also decreases the acoustic impact created between the fl...
SUPPLEMENTARY GALVANISED STEEL BASE
Supplementary galvanised steel base The supplementary galvanised steel base consists of a 1 mm thick galvanised sheet and it measures 184x184 mm in size, it is applied under the base of the metal pedestals SMA and SMAT in order to protect the waterproofing membrane from the supports of th...
TILE LIFTER
Tile lifter It is an essential tool if you want to remove or move an already laid flooring plate. It has the possibility of slipping into the 2-3-4 mm joints, it is easy to hold and use. It is sufficient to insert the tool into the joint and rotate it 90°, at this stage the plate is ra...
Zinc-plated lifting handle for tiles 400 x 400 mm
Zinc-plated lifting handle for tiles 400 x 400 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints a...
Zinc-plated lifting handle for tiles 500 x 500 mm
Zinc-plated lifting handle for tiles 500 x 500 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simple one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints an...
Zinc-plated litfing handle for tiles 600 x 600 mm
Zinc-plated litfing handle for tiles 600 x 600 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints a...
ADJUSTABLE LIFTING HANDLE
Adjustable lifting handle The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are inserted into the joints and allow to lift al...
SUCTION CUP TILE LIFTER
Suction cup tile lifter The vacuum suction cup tile lifter is an innovative solution for handling ceramic slabs; thanks to the rubber plate, with a diameter of 200 mm, it guarantees excellent grip. Thanks to its side seal, it is perfectly adaptable and grips on any surface, s...
TWIST slope compensator TW 110
TWIST Slope Compensator The Twist slope compensator has been studied to allow the leveling of slopes from 0% up to 1% degree with a simple movement. Modular and easy to adjust with a simple rotation, allows for perfectly flat surfaces. Twist slope compensator combined together add up th...
Slope Compensator TWIST 150
Slope Compensator TWIST 150 The Twist slope compensator TW 150, created in the specific 150 thickness for the Star.T support, allows the inclination from 0% up to 1%: suitably matched and adjusted ensure the perfect fl atness of any pavement. Compatible with EH Supports with fixed height. ...
Safety plate
Safety plate The safety plate by Eterno Ivica consists of a 2 mm thick galvanized steel sheet, suitably shaped in order to support the flooring elements in the event of accidental breakage, eliminating the risk of accidents as the safety plate will support both the flooring element and the pos...
Plate edge profile
Plate edge profile The plate edge profile by Eterno Ivica is designed to limit the raised floor’s edges in correspondence with a vertifcal covering. The plate edge profile has a 20mm decorative part and a tooth overlapped to the vertical plate in order to hide the junction with the floor. I...
LGH1 shims' thickness for supports
LGH1 shims' thickness for supports LGH1 shims' thickness for supports with anti-slip and anti-noise effect. Disks for creating thickness in one or more support's sections.
LGH2 shim for support
LGH2 shim for support LGH2 shims' thickness for supports with anti-slip and anti-noise effect. Disks for creating thickness in one or more support's sections.
LGH3 Shim for support
LGH3 Shim for support LGH3 shim for support with anti-slip and noise reduction. Disks for shimming one or more sections of the support.
LH3 rubber shim for support
LH3 rubber shim for support Disks for shimming one or more sections of the support. The LH3 shim for supports can be used above or below any support and acts as a shim for one or more sections of the support.
Clips for hexagonal plates
Clip for laying hexagonal plates With the simple and quick application of a small polypropylene clip on the heads of SE and NM supports, we can meet the creative needs of architects and customers who see in the hexagonal plates a possible and imaginative aesthetic solution for the realization ...
TOOL TO INCREASE THE THICKNESS OF THE FINS
Tool to increase the thickness of the fins This accessory allows to increase the thickness of the fins, it is simply pushed into the 4 mm thick fins and it is available for sizes from 5-6-7-8-9-10 mm. The 12 mm height of the fins remains unchanged.
Aluminium ECO joist
The aluminium ECO joist in a new version lighter and cheaper. Realized in two different colors: aluminium and black. The joist offered in two different solutions: The A side is defined by two boxed profiles, divided by a 4 mm gap defining a lane, required for attaching the metal clips suppl...
Aluminium ECO joist for rapid flow
The NEW Aluminium ECO joist for rapid flow in a new version: lighter and cheaper. Realized in two different colors: aluminium and black. Defined by a 'double joist' structure, consisting of two boxed profiles, divided by a 6.5 mm gap, the space required for fixing the metal clips supplied as ...
Aluminum Joist
Aluminum Joist Used for laying the ceramic planks on a substructure of aluminum joists with SE, NM, SB, ST, EH Supports. *the price of Eterno and New Maxi adjustable support for aluminum joist is equal to the supports with 2, 3 or 4 mm thick tabs.
Aluminium joist for rapid flow
Aluminium joist for rapid flow The aluminium joist for rapid flow is a “double joist” consisting of two profiles spaced by a 6.5 mm gap which serves as drainage for the rapid outflow of rainwater. It has been designed for the installation of porcelain stoneware slabs, multi-format sl...
Joist joint
Joist joint The Eterno Ivica joist joint is a non-structural product, therefore it only acts as a connection between various joists to avoid any displacement. Made of black polypropylene, it can be used both on cantilever beams and on rafters resting on the head. It presents t...
Quick flow joint joist
Quick flow joint joist Quick flow joint joist for the new aluminium joist.
PVC gasket for quick flow joist
PVC gasket for quick flow joist PVC gasket for the aluminium quick flow joist.
Noise Insulating Rubber for Aluminum Joist
Noise Insulating Rubber for Aluminum Joist It is available in practical rolls, the adhesive tape in noise insulating rubber to be placed on the aluminum joists for the entire length or in the chosen points, in order to avoid direct contact between the plates and the metal.
Tiles Spacers for Aluminum Joist
Tiles Spacers for Aluminum Joist The Tiles Spacers with angular spacer function is designed to keep the planks in the correct location and create the escape. The clip has a configuration that allows the insertion at any point of the joist remaining in its housing without coming out of thei...
Tile levelling system
Leveller for tiles The leveller for tiles is an indispensable tool for the installation of porcelain stoneware floors and walls and it consists of three elements: a tie rod, a spacer and a protection ring. The cylindrical part called "tie rod" is inserted in the "spacer" by screwing an...
Safety grid
Safety grid The safety grid is made up of a panel measuring 50 x 50 cm and 4 cm high, produced with black thermoplastic polymer. The purpose of this panel is to create a sub-floor on which various types of flooring can be directly laid, such as porcelain stoneware, marble, stone, syntheti...
Vertical perimeter profile
Vertical perimeter profile The Vertical perimeter profile is an element of closure and finishing of the perimeter edges in the external raised flooring, it adapts perfectly to the flooring slabs of 20 mm thickness and to the supports that act as a substructure. It is a product that combines...
Joint 90° Angle
Joint 90° Angle The 90° Corner Joint is a related accessory of the vertical perimeter profile. Available in two colors, silver and anthracite gray, the joint is in aluminum and has standard heights of 30-60-90-120-150 mm. Necessary for the creation of internal or external corners of te...
Linear joint
Linear joint The Linear Joint is a related accessory of the vertical perimeter profile. It is available in two colors, silver and anthracite gray, the joint is in aluminum and has standard heights of 30-60-90-120-150 mm, like the profile and the 90 ° joint. It is necessary for the realiz...
